What it is
Aluminium windows
A Max Light variant with industrial lines inspired by steel profiles.
Role in the project
Max Light STEEL
STEEL is a design version of the Max Light family.
What to consider
Purpose and limitations
Max Light STEEL and Steel Look are two different products.
Four geometries of the Max Light family
Choose the architectural character, not a higher profile level
DESIGN, MODERN, INVISIBLE and STEEL are four Max Light versions of equal standing, each with its own cross-section and exterior line. The names describe geometry and appearance; they are not a quality ranking.
01
Technical system name
Profiled architectural linesMax Light DESIGN
Choose DESIGN when you want visible profiling to give the window a stronger architectural character. It has a geometry of its own and is not a decorative cover on another Max Light version.
View version02Technical system name
Straight modern linesMax Light MODERN
MODERN suits projects that call for flatter, more understated profiles and a clean, contemporary look. We confirm the final choice based on the detailing you prefer and the configuration of the opening.
View version03Technical system name
Barely visible sashMax Light INVISIBLE
INVISIBLE uses concealed-sash geometry so that the opening part is less noticeable from outside. It is not an add-on to a standard window but a separate system variant.
View version04This systemTechnical system name
Industrial steel aestheticMax Light STEEL
STEEL brings an industrial rhythm and profiling to the Max Light family. It is still an aluminium system; it is not the Steel Look family and it is not made of steel.
This systemProfile section
Max Light STEEL · Profile section
The cross-section is an illustrative view of the system. Exact dimensions and geometry are confirmed against the approved technical drawing.
Technical overview
Max Light STEEL aluminium windows
- Uf across the family, subject to the exact configuration
- down to 1.8 W/m²K, depending on the profile combination and the infill thickness
- Design version, verified technical data
- STEEL
Key points about the system
Max Light STEEL is not part of the Steel Look family.
Comparable solutions
Aluminium windows
Thermally brokenAluminium windowsSystem profile
Genesis 90
A deep, thermally broken window and door system for projects with high demands on the building envelope.
Why this profileThe premium Genesis choice for thermal insulation
View systemChoose Genesis 90 when the insulation of the building envelope, a low-energy standard and long-term efficiency take priority over the lowest initial cost.
Price level: premium
Thermally brokenAluminium windowsSystem profile
Genesis 75
A versatile window and door platform with a 75 mm system depth, the basis for several distinct variants with different functions.
Why this profileThe best all-round Genesis choice
View systemChoose Genesis 75 when you want a good balance between thermal insulation, system options and cost for contemporary residential and commercial buildings.
Special variantsOutward opening · concealed sash · controlled ventilation · integral blind
Price level: mid-range
Thermally brokenAluminium windows
Genesis OUT
A Genesis 75 variant with sashes that open outwards.
View system
Thermally brokenAluminium windows
Genesis SU
A Genesis 75 window with a concealed sash and more uniform sightlines from the outside.
View systemFrequently asked questions
Before the final specification
What is the Max Light STEEL system?
A Max Light variant with industrial lines inspired by steel profiles.
What is the Max Light STEEL system designed for?
STEEL is a design version of the Max Light family.
What should you consider when choosing the Max Light STEEL system?
Max Light STEEL and Steel Look are two different products.
Is all the technical data the same for every version?
Sizes, glass, hardware, structural calculations, threshold and opening type are confirmed for each individual opening – only then can the system be tailored to your LUMORA project.
LUMORA · PROJECT SPECIFICATION
Send your plans for a precise specification
Sizes, glass, hardware, structural calculations, threshold and opening type are confirmed for each individual opening – only then can the system be tailored to your LUMORA project.